# Novatec v3 — Human-level (rendered + vision) comparison

Every page rendered in a real browser; live vs staging compared by sight + text. PDF datasheets compared against the staging HTML.

**Confirmed issues: 51** (4 high, 24 medium) · of which **visual/image: 12** · **datasheet-vs-PDF: 39** · intentional edits: 11

## Confirmed issues

### 🔴 🖼️ `/products/drying/hydrotracer/` — layout-broken
- **Staging HydroTracer HT3 page has a broken/empty 'How It Works' section, a misplaced black video box, plus a misspelled 'DOWNLOD' CTA button.**
- 👁️ visual: Live shows the 'How It Works' section with a proper video thumbnail (blurred image + play button); on staging that section renders as a large blank white area and the video appears displaced upward into the blue 'Gold-Standard Precision' section as a black un-poster'd HTML5 player box. Live's 'Gold-Standard Precision' CTA row has 3 buttons; staging adds a 4th button reading 'DOWNLOD' (misspelled).
  - **missing-section-visual** — live/PDF: «'How It Works' section shows a video thumbnail with play button» → staging: «'How It Works' section is blank/empty; video floated up into Gold-Standard section as a black box»
  - **typo** — live/PDF: «DOWNLOAD (or Data Sheet)» → staging: «DOWNLOD button label»
  - **added-cta** — live/PDF: «3 CTAs: Request Info / Data Sheet / Contact Us» → staging: «4 CTAs with an extra Download button inserted»

### 🔴 `/products/controls/receiver-and-vacuum-pump-controls/` — content-error
- **Staging H1 heading reads 'Membrane Compressed Air and Nitrogen' instead of 'Receiver and Vacuum Pump Controls'; product list is correct.**
- 👁️ visual: Live shows large H1 'Receiver and Vacuum Pump Controls' with a 4-up product grid; staging's big orange H1 says 'Membrane Compressed Air and Nitrogen' even though the breadcrumb and the six listed products (FX2, FTS FlexTouch, MCS-400, FlexTouch Central, MCS-600, MCS(C) Allen Bradley) are correct. Layout is also the staging vertical-list template vs the live grid.
  - **page heading (H1)** — live/PDF: «Receiver and Vacuum Pump Controls» → staging: «Membrane Compressed Air and Nitrogen»
  - **intro subtitle** — live/PDF: «Products for Receiver and Vacuum Pump Controls» → staging: «(absent on staging)»

### 🔴 📄 `/products/drying/membrane-compressed-air-and-nitrogen/novadrier-3-membrane-resin-dryer/novadrier-manual/` — dropped-content
- **HTML datasheet drops manual section 1.2 (diffuser-tube install + 'never run below 75% full' note) and shows 'supply' as 'LOWER' throughout; spec tables and other sections are otherwise faithfully reproduced.**
- 👁️ visual: Staging page renders the full manual with spec tables, yellow CAUTION boxes, product photo and troubleshooting tables intact; PDF cover and ozone-caution page reproduced faithfully. No layout breakage, but the section 1.2 body/diffuser-tube figures are absent.
  - **dropped-section** — live/PDF: «Section 1.2 'General Inspection & Mounting' body (PDF p5): visual inspection, cleaning/reinstalling the (2) perforated upper & lower air diffuser tubes, optional short-run diffuser tube, and the note » → staging: «Section 1.2 appears only in the Table of Contents; the body jumps straight from '1.1 Unpacking' to '1.3 Clamp Ring Inspection' -- all 1.2 diffuser-tube instructions and figures are missing»
  - **text-corruption** — live/PDF: «the word 'supply' (e.g. 'Power supply', 'air supply valve', 'supply orifice', 'compressed air supply system', 'arising out of the supplying of the said equipment')» → staging: «rendered as 'LOWER' (~33 occurrences: 'Power LOWER', 'air LOWER valve', 'LOWER orifice', 'the LOWERing of the said equipment'); a font/ToUnicode extraction artifact that also appears in the PDF text b»
  - **minor-correction** — live/PDF: «PDF typos '375°F (191°F)' and '70 PSIG (4.7 BagG)'» → staging: «HTML corrects these to '375°F (191°C)' and '70 PSIG (4.7 Barg)' (improvements, not defects)»

### 🔴 `/cpra-opt-out/` — wrong-content
- **CPRA opt-out page copy and its functional control are completely different: live offers an interactive cookie/opt-out preference tool, staging shows a static disclaimer and a home-page link.**
- 👁️ visual: Live shows headline 'Cookie Preferences & Privacy Choices' with a dark-blue 'DO NOT SELL MY INFORMATION' action button (opens the cookie/consent manager). Staging shows headline 'Do Not Sell or Share My Personal Information' with an orange 'GO BACK TO HOME PAGE' button and no opt-out control. Same exclamation-mark icon on both.
  - **headline** — live/PDF: «Cookie Preferences & Privacy Choices» → staging: «Do Not Sell or Share My Personal Information»
  - **body-copy** — live/PDF: «We use cookies and similar technologies to improve your experience... you may choose to opt out of the use of non-essential cookies... If you would like to manage your preferences, click the button be» → staging: «Novatec does not sell or share personal information. However, if you wish to exercise your opt-out rights under the California Privacy Rights Act (CPRA), please contact us. You may also review our Pri»
  - **cta/functionality** — live/PDF: «'DO NOT SELL MY INFORMATION' button that launches the cookie-preference / consent manager (actual opt-out control)» → staging: «Functional opt-out control dropped; replaced by a 'GO BACK TO HOME PAGE' link»
  - **footer-note** — live/PDF: «'For additional information about how we collect, use, and protect your information, please review our privacy policy.' line present» → staging: «Line dropped»
  - **breadcrumb** — live/PDF: «Home > Opt Out» → staging: «Home > CPRA Opt Out»

### 🟠 🖼️ `/products/conveying/infinityseries/` — layout-broken
- **Copy, hero and product image match live, but the two energy-savings charts are missing and several feature-media tiles render as solid black boxes on staging.**
- 👁️ visual: Live's 'Unleash Massive Energy Savings!' section shows two line charts ('Significant Energy Reductions Throughout The Pump Operating Range' and 'While Pump Is Idle'); on staging that area is blank white space (charts absent). In the 'Handles Fragile Materials with Gentle Precision' and 'Protect Your Operation' sections, multiple feature videos/images render as large solid BLACK boxes on staging where live shows content (light/loaded). Hero vacuum-pump image with magnified InfinityDrive motor inset matches on both.
  - **missing-image** — live/PDF: «Two energy-reduction line charts under 'Unleash Massive Energy Savings!'» → staging: «Charts absent — blank white gap»
  - **broken-media** — live/PDF: «Loaded feature imagery/video in Handles-Fragile / Protect-Your-Operation sections» → staging: «Feature tiles render as solid black boxes»
  - **extra-buttons** — live/PDF: «'Data Sheet' and 'Manual' buttons» → staging: «Staging adds extra 'Download Datasheet' and 'Download Manual' buttons alongside them»

### 🟠 🖼️ `/products/conveying/smartconveying/` — layout-broken
- **All SmartConveying copy matches, but several mid-page media/video blocks render as solid black boxes on staging and the hero image appears to differ.**
- 👁️ visual: Text/structure identical (R.I.P. hero, AI+EV band with 4 tech buttons, all feature headings/bullets, CTAs, contact form, energy-reduction chart). However staging shows large solid-black rectangles in the 'Protect Your Operation from Maintenance & Downtime', 'Automated Line Clearing with Ludicrous Mode' and 'Protect Your Equipment & Your Budget' sections where live shows actual feature imagery/video; the hero photo also looks different (live = blue conveying tubes vs staging = industrial-facility interior).
  - **feature media blocks** — live/PDF: «visible feature images/videos in the mid-page sections» → staging: «solid black boxes (media not loading) in Protect Your Operation, Automated Line Clearing, and Protect Your Equipment sections»
  - **hero image** — live/PDF: «blue conveying-tubes hero photo» → staging: «different industrial-facility interior photo»

### 🟠 📄 `/products/drying/desiccant-wheel/thermal/thermal-plus-manual/` — content-error
- **Manual specs/tables reproduced correctly, but a stray block references a different manual (NW3 UG August 15, 2024) and most internal diagrams/screenshots are dropped.**
- 👁️ visual: Staging renders the cover dryer photo and body text, but the numerous HMI screen captures, assembly illustrations, flow diagram and component photos from the PDF appear as blank gaps.
  - **wrong document reference leaked in** — live/PDF: «User Manual: Thermal+ NWB UG 22 May 2019 (the only doc reference)» → staging: «An extra duplicated block also shows 'Instruction Manual: NW3 UG August 15, 2024'»
  - **dropped figures** — live/PDF: «Assembly diagrams, NovaTouch screen captures, flow diagram and component photos» → staging: «Missing / blank areas on HTML»
  - **typo** — live/PDF: «11.0 PRINCIPLE OF OPERATION» → staging: «11.0 PRINCIPLE OF OPERATIO (missing N)»

### 🟠 📄 `/products/drying/desiccant-wheel/novawheel-medium-desiccant-wheel-dryer/nwpg-500-thru-nwpg-5000-manual/` — content-error
- **NWPG manual specs/electrical tables reproduced accurately, but a warranty column heading is mislabeled and an extra maintenance row was added; instructional figures are absent.**
- 👁️ visual: Staging renders text and the section-3.4/4.3.x tables well, but the manual's many diagrams/photos (product-familiarization callouts, system flow diagram, PLC screen maps and screenshots) appear blank/missing in the HTML.
  - **warranty-heading** — live/PDF: «Second 5-Year column heading reads 'Resin Blending and Feeding to Include' (WSB Blenders, MaxiBatch & Feeders, Gaylord Sweeper Systems)» → staging: «Heading mislabeled as 'Resin Drying to Include:' (duplicate of the first column heading)»
  - **maintenance-row-added** — live/PDF: «Suggested Maintenance Schedule (12.1) has no 'Process Heater' row in the source PDF» → staging: «Staging adds a 'Process Heater - Compare process temperature setting to hopper inlet temperature... Every 2 weeks' row not present in the PDF»
  - **missing-figures** — live/PDF: «Manual includes labeled component photos, system flow diagram, screen map, and PLC screen images» → staging: «These figures are largely absent/blank in the HTML rendering (text and data tables retained)»
  - **spec-table-verify** — live/PDF: «NWPG-600..5000 max flow 600/273 thru 5000/2273, water lines 5/8-1in, GPM 10-40, wheel 9-11 rph; NWPG-5000 electrical 134.2/168.4, 60/69.0, 5/6.0, 73.5/92.3» → staging: «all matched in staging»

### 🟠 `/which-resin-dryer-is-right-for-you/` — dropped-content
- **Staging drops the article H1 title 'Which Resin Dryer Is Right For You?'; page opens straight at the author byline.**
- 👁️ visual: Live shows a large H1 headline 'Which Resin Dryer Is Right For You?' above the Mark Haynie byline; staging has no such heading and starts with the byline. Hero equipment collage and all section images are identical on both.
  - **missing-heading** — live/PDF: «H1 page title 'Which Resin Dryer Is Right For You?' displayed above the author byline (as on live)» → staging: «No visible article title heading on staging; content begins with 'Mark Haynie | June 5, 2023 | 5 min read'»

### 🟠 `/systems/` — dropped-content
- **Systems page copy is fully intact, but staging drops the 'Watch How We Tailor Systems' video thumbnail and every 'Meet Our System Experts' headshot photo.**
- 👁️ visual: LIVE: the 'Watch How We Tailor Systems to Fit Your Exact Needs' section has a video/image thumbnail on the left, and each team member (Don Wood, Bill Oscar, Dennis Wallen, Ricky Schultz, Dave McCurdy, Ron Ullman, Matt Cisneros, Alex Vidal, Edgar Guzman, Ricardo Nieto, Baldo Ramirez) shows a headshot photo. STAGING: the video thumbnail is a solid dark-blue placeholder and all headshot photos are missing (blank white space) — only names/titles/phones/emails render.
  - **media-missing** — live/PDF: «Video thumbnail image in 'Watch How We Tailor Systems' section» → staging: «No image; solid dark-blue block on staging»
  - **media-missing** — live/PDF: «Headshot photo above each of the 11 systems-expert names» → staging: «All headshots absent on staging; text-only cards»
  - **typo** — live/PDF: «"*" indicates required fields» → staging: «"*" indicates required field (singular)»

### 🟠 `/products/drying/membrane-compressed-air-and-nitrogen/novadrier-esp/` — dropped-content
- **NovaDRIER ESP (Spanish) page: DryerGenie section's promo video/image thumbnail is missing on staging, leaving a blank left column; all text/specs otherwise match.**
- 👁️ visual: In the 'DryerGenie-Listo para Secado Inteligente' section, live shows a colorful robot/genie video thumbnail with a play button in the left column; on staging that column is blank/white (image dropped). Hero, FiberMax dual-flow diagram, piggy-bank energy-savings image, and all copy are present on both.
  - **missing-image** — live/PDF: «DryerGenie promotional video/image thumbnail (colorful genie/robot with play button) displayed left of the DryerGenie copy» → staging: «Left column blank on staging — DryerGenie video/image not rendered»

### 🟠 📄 `/products/drying/desiccant-wheel/novawheel-portable-dry-convey-packages-nwb-dc-plus-and-nwb-dc/nwb-dc-and-nwb-dc-plus-manual/` — dropped-content
- **NWB-DC manual HTML is otherwise faithful but drops the Section 12.0 model/receiver specifications table (max flow, voltage, receivers, wheel speed, water/flow).**
- 👁️ visual: Under '12.0 SPECIFICATIONS' staging shows only the dew-point/temperature spec block and goes straight to the next section; the 7-column model table (-25 to -300) present in the PDF is absent, not rendered as an image.
  - **dropped-table** — live/PDF: «Section 12.0 table: Model NWB-DC&DC+ -25..-300 with *Max material Flow 25/11.4..300/136, Voltage 460-3-60, Hopper Receiver VR-5/VR-12, Machine Mount Receiver VR-5MM, Wheel Speed 10 RPH, Water In/Out 3» → staging: «Table entirely missing from staging HTML (VR-5MM / Max material Flow / 460-3-60 / Wheel Speed strings not present)»
  - **link** — live/PDF: «https://www.youtube.com/watch?v=jkp80Q7D4IE» → staging: «http://www.youtube.com/watch?v=jkp80Q7D4IE (minor)»

### 🟠 📄 `/conveying-supplement/` — dropped-content
- **All body copy and data tables reproduced accurately, but the contents-page date is wrong (Feb vs Jan) and most in-article figures/diagrams/photos are missing (empty caption boxes).**
- 👁️ visual: Staging renders text and every data table, but the Figure 1 impact-zone diagram, elbow/receiver photos, streamer photos, and the purge-valve/receiver cross-section diagrams appear only as empty outlined caption boxes — the images did not load. Cover and contents hero images did load.
  - **date-typo** — live/PDF: «contents | January 2015 (supplement is dated January 2015 throughout)» → staging: «contents | February 2015»
  - **figures-missing** — live/PDF: «in-article diagrams and photos (Figure 1 impact zone, ceramic/glass elbow photos, receiver inlet damage photos, modern purge take-off valve diagram, receiver cross-section)» → staging: «empty caption boxes with text only; images absent»
  - **caption** — live/PDF: «separate captions for Ceramic-Lined Elbows and 'Glass elbows are highly abrasion-resistant… static release strap'» → staging: «Ceramic-Lined caption duplicated; glass-elbow caption dropped»

### 🟠 📄 `/drying-supplement/` — dropped-content
- **Body copy and Table 1/Table 2 plus central-drying savings tables reproduced accurately, but the energy-cost bar chart, the Matsui sponsored ad, and most dryer diagrams/photos are missing.**
- 👁️ visual: Body text and Tables 1 (polymer moisture), 2 (drying/softening temps) and the central-drying savings tables render, but the 'Typical Energy Costs/100 lb of Throughput' bar chart, the wheel-dryer air-flow diagram, twin-tower dryer photo, vacuum/membrane dryer illustrations and DSC-scan figure show as empty caption boxes.
  - **chart-missing** — live/PDF: «Energy cost chart values: $0.27 NovaWheel w/ Adaptive Control, $0.30 w/o, $0.44 Vacuum Dryer, $0.50 NovaDrier Membrane, $0.68 Dual Bed, $1.30 Compressed Air Dryer w/ membrane option» → staging: «bar chart image absent; only the caption 'Typical Energy Costs/100 lb of Throughput' shown, no dollar values»
  - **ad-dropped** — live/PDF: «inside-cover Matsui sponsored ad ('Standard LED Alarm Light… Matsui Charges Over $250!', 'We Include It. Matsui Charges an Extra $900!', Exclusive Overdry Protection)» → staging: «ad content dropped; only 'Easiest to Use Mobile Wheel Dryers' heading remains»
  - **figures-missing** — live/PDF: «dryer diagrams and photos throughout the article» → staging: «empty caption boxes; images absent»

### 🟠 📄 `/products/drying/central-drying/central-dryer/central-drying-conveying-datasheet/` — dropped-content
- **Central Drying/Conveying datasheet is largely faithful (all payback numbers and diagrams match) but the FlexXpand NovaNet section images are missing (blank gaps) plus a couple of minor text drops/typos.**
- 👁️ visual: Staging renders the diagrams (How Central Drying Works, OverDry hopper, MoistureManager, Central Drying Assemblies photos) correctly, but the bottom FlexXpand NovaNet section shows large empty white areas where the PDF has 6 touch-screen software screenshots (Control of 4 dryers/48 hoppers, Auto ID 73 sources, 20 vacuum pumps, central blending, 12 silos, 2 railcar systems). Captions are present, images are not.
  - **missing-images** — live/PDF: «FlexXpand NovaNet section with 6 software/dashboard screenshots» → staging: «captions present but the accompanying images render as blank white gaps»
  - **typo** — live/PDF: «You have frequent material changes on your machines» → staging: «You have frequent material changes on your machine»
  - **typo** — live/PDF: «OverDry protection (with space)» → staging: «OverDryprotection (space dropped in MoistureManager caption)»
  - **spec-detail-dropped** — live/PDF: «Energy Costs: $.10/kwh x 11 kw x 8000 hr./yr. x 12 (400pph) dryers» → staging: «$0.10/kWh × 11 kW × 8000 hr./yr. × 12 dryers ((400pph) dropped)»
  - **spec-detail-dropped** — live/PDF: «Based on 2 hour average x 3 changes/machine/week x $50/hr.» → staging: «Based on average: 3 changes/machine/week × $50/hr. ("2 hour" dropped)»

### 🟠 📄 `/products/controls/central-plastics-drying-and-plastics-conveying-controls/cl-silo-manager/cl-manual/` — dropped-content
- **CL Manual HTML has complete/accurate body text but a truncated cover title, wrong cover copyright year, and all inline illustrations/screenshots dropped.**
- 👁️ visual: Cover heading renders 'For up to 12 S' (cut off); every referenced figure (LOGO! LCD, Silo Status/Setup/User View/Alarm HMI screenshots, sensor-wiring and 3DVision diagrams) is absent from the HTML even though body text repeatedly says 'screenshot at right'. Only the cover control-box photo and NOVATEC logo remain.
  - **cover-title-truncated** — live/PDF: «Silo Manager: CL Analog Silo Controllers For up to 12 Silos» → staging: «...For up to 12 S (title cut off)»
  - **cover-copyright-year** — live/PDF: «© 2018 Novatec, Inc. All Rights Reserved (cover)» → staging: «©NOVATEC, Inc. 2017 All Rights Reserved»
  - **figures-dropped** — live/PDF: «PDF includes ~10 inline figures (LOGO! message-display screen, Silo Status screen, Silo Setup screen, User View table, Alarm Summary/History, sensor wiring, 3DVision connection screen)» → staging: «no inline figures rendered in HTML; text still references them»
  - **spec-text** — live/PDF: «warranty dates '7.0 WARRANTY Effective Date 1 MARCH 2017' (TOC) / '7 FEB 2018' (heading); IP 192.168.1.190-192; 250 ohm resistor; 4-20mA; passwords 1111/2222/3333» → staging: «all body specs match PDF exactly»

### 🟠 📄 `/products/drying/gas-fired-process-heaters/gfh-series-gas-fired-process-heater/gfh-500-thru-gfh-1000-manual/` — dropped-content
- **Full GFH manual reproduced with all spec tables/parts lists intact, but a safety-interlock paragraph is dropped and the cover footer shows the wrong copyright year/doc number.**
- 👁️ visual: Cover product image (gas-fired heater unit) matches the PDF; long single-page HTML layout is intact with no breakage. Internal figures (burner cross-section, control panel, gas trains) appear only as captions on HTML, not the diagrams.
  - **cover-copyright** — live/PDF: «© NOVATEC, Inc. 2016 All Rights Reserved» → staging: «©NOVATEC, Inc. 2017 All Rights Reserved»
  - **cover-document-number** — live/PDF: «Document: GFH-NT 500-1000 IM 14 DEC 2016» → staging: «Document: ND IM 3 JAN 2017»
  - **dropped-paragraph** — live/PDF: «Sequence of Operation item 2.2: full Safety Interlocks paragraph (CR/LGPS/HGPS/CHTL/PHTL/1TDRA/1OL closed -> combustion blower energized, APS closed -> air purge begins, total purge time 1 minute)» → staging: «Paragraph absent; HTML jumps from item 2.1 to 2.3»
  - **toc-missing-entries** — live/PDF: «TOC lists 15.0 TYPE IV GAS HEATER CHECK LIST (30) and 16.0 WARRANTY (33)» → staging: «TOC ends at 14.0 PARTS LISTS (24); 15.0 and 16.0 not listed (though the body sections themselves are present)»
  - **warranty-wording** — live/PDF: «periods listed under “Warranty Period”; includes sentence 'Please note that we always strive to satisfy our customers...'» → staging: «reads “Warranty Periods”; the 'we always strive to satisfy our customers' sentence is omitted»

### 🟠 📄 `/products/conveying/vacuum-loaders/gsl-series-brushless-vacuum-loader/gsl-manual/` — dropped-content
- **GSL manual HTML is spec-accurate overall but drops the Operation Overview section and the loader-control settings values from the PDF's annotated pages.**
- 👁️ visual: Staging renders the manual as one long single-column page with embedded figure photos; the Operation Overview annotated diagram (PDF p.8) and the control-settings/function box (PDF p.10) do not appear as readable content.
  - **dropped-section** — live/PDF: «Section 'OPERATION OVERVIEW' (PDF p.8) with guidance on setting load time, feed-tube/air-inlet adjustment and good air-to-material mixture» → staging: «Section absent in HTML body — jumps from 4.2 GSL Machine Mount Models straight to 6.0 Adjusting the Loader Control»
  - **dropped-spec** — live/PDF: «Control settings detail (PDF p.10): MOTOR ON default 15s, suggested max 20s, do not exceed 30s; BLOWBACK 'XY'; ALARM cycles; DUMP TIME; PROPORTIONING LAYERS/REGRIND %; PURGE» → staging: «Not present in HTML — only figure captions (Control Box, Pendant Cable Connector, Remote Pendant) carried over»
  - **faithful** — live/PDF: «Specs (115V, 80 PSI), warranty periods (5/3/1-year lists), troubleshooting table, address 222 East Thomas Ave Baltimore MD 21225, phones» → staging: «All reproduced accurately in HTML»

### 🟠 📄 `/products/drying/desiccant-wheel/novawheel-nw3-hc-portable-hopper-dryer-system/nw3-manual/` — dropped-content
- **Full, accurate HTML rebuild of the NW3 manual; all spec tables match the PDF, but figures/screen-captures are blank and the back-cover address block is missing.**
- 👁️ visual: Staging renders the correct NovaWheel dryer hero image matching PDF page 1, but the manual's instructional figures (NovaTouch screen captures, the section-4 exploded basic-components view, diffuser-cone/filter/rotor diagrams) are not rendered and appear as large blank white gaps in the HTML.
  - **dropped-figures** — live/PDF: «PDF includes ~30 figures: exploded basic-components assembly view, NovaTouch HMI screen captures, filter/rotor/seal photos and diagrams» → staging: «HTML shows blank placeholders/empty space where these figures should appear»
  - **dropped-address** — live/PDF: «PDF back cover: 222 East Thomas Avenue, Baltimore, Maryland 21225; Phone 410-789-4811 or 800-938-6682; 24 Hour service 800-938-6682; Fax 410-789-4638; parts/service/sales@novatec.com» → staging: «Back-cover contact/address block not present in HTML body (ends at Warranty Exclusions)»
  - **spec-tables-verified** — live/PDF: «Dry/Convey & Hopper-Cart dimension tables, throughput/connected-load amps, water flow-rate chart, Phoenix LED code chart, maintenance schedule, warranty lists» → staging: «All values reproduced exactly (e.g. NW3-200-DC+ 68.7in/174cm, 96.3in/245cm, 600lb/273kg, 30.7A; regen temp 380°F/190°C; dew point -40°F)»

### 🟠 📄 `/products/conveying/vacuum-pumps/svp-silencer-vacuum-pump-with-pumpsense/svp-manual/` — dropped-content
- **SVP manual text and all spec tables are faithful, but every embedded diagram/illustration is missing on staging (blank areas).**
- 👁️ visual: Section headings and NOTE boxes remain but the images are blank: all three wiring diagrams (24VDC 380/460, 115VAC 380/460, 24VDC 575), the Closed-Loop and Ambient-Air conveying system illustrations, the lubrication breather/fill-port/oil-drain diagram, and the sight-glass fill photo are all absent, where the PDF shows full diagrams.
  - **missing-image** — live/PDF: «3 wiring diagrams (pp.11-13), Closed-Loop + Ambient-Air system illustrations (p.6), lubrication oil-port diagram + sight-glass photo (p.10)» → staging: «captions/NOTE boxes present, diagram images blank/omitted on staging HTML»
  - **spec-tables** — live/PDF: «FLA/KVA, standard-specs, regulator, belt-tension and lubricant-capacity tables» → staging: «all reproduced accurately (values match PDF, incl. PDF's own 460/3/30 typo)»
  - **minor-text** — live/PDF: «Parts list oil: NOVATEC P/N VPDB-QT and VPDB-CASE» → staging: «staging shows 'NOVATEC / VPDB-QT and VPDB-CASE' (P/N label dropped, trivial)»

### 🟠 📄 `/products/drying/desiccant-wheel/novawheel-small-dryer-nwb-plus-and-nwb/nwb-and-nwb-hc-manual/` — dropped-content
- **NWB manual text and all spec/maintenance tables are faithfully reproduced, but the manual's internal labeled diagrams, component photos and NovaTouch control-screen captures are missing, plus a few duplicated/mislabeled section headings.**
- 👁️ visual: Staging HTML has large blank gaps where PDF figures should be: the 4.0 Product Familiarization labeled dryer diagram, 4.1 -300/-400 layout diagram, 12.x NovaTouch touchscreen captures, and 17.x maintenance photos (filters, plasticizer drain, chain/sprockets) are all absent; only cover product photos render.
  - **missing-figures** — live/PDF: «Labeled component diagram under 4.0 PRODUCT FAMILIARIZATION and 4.1 layout diagram; NovaTouch screen captures in sections 12-16; maintenance photos in 17.x» → staging: «blank space, figures not migrated»
  - **heading-error** — live/PDF: «14.0 SETTINGS SCREEN (Any level can view)» → staging: «heading rendered as duplicate '13.0 INITIAL DRYER SETUP'»
  - **duplicated-heading** — live/PDF: «single '12.1 System Conventions:' and single '15.4 Message Screen – Alarms'» → staging: «both headings duplicated in the flow»
  - **dropped-footnote** — live/PDF: «*See 3-Year Warranty above» → staging: «footnote omitted from 1-Year warranty column»

### 🟠 📄 `/products/conveying/bulk-plastics-materials-handling/rcu-railcar-unloading-system/rcu-manual/` — spec-or-number-change
- **RCU manual is mostly faithful, but the 460V parts-list model column headers are wrong and the Section 16 heading is corrupted.**
- 👁️ visual: Product image (RCU railcar unloader) and table layout are intact; the defects are in the text/data, not the visuals.
  - **460V parts list (14.1) model column headers** — live/PDF: «RCU-4D4D-2525 | RCU-4D4P-2525 | RCU-4P4D-2525 | RCU-4P4P-2525» → staging: «RCU-4D4P-2525 | RCU-4D4P-2525 | RCU-4D4P-2525 | RCU-4P4P-2525 (1st and 3rd columns wrong)»
  - **Section 16 heading** — live/PDF: «16.) SPECIAL NOTE: SHEAVE RE-INSTALLATION» → staging: «1.0 GENERAL DESCRIPTION (heading text corrupted; body copy is correct)»
  - **Warranty period header** — live/PDF: «single '5-Year (Except 1-Year on Non-Novatec Buy-Out Items)'» → staging: «duplicated: a bare '5-Year' header followed by '5-Year (Except 1-Year on Non-Novatec Buy-Out Items)'»

### 🟠 📄 `/products/drying/gas-fired-process-heaters/gfh-series-gas-fired-process-heater/gfh-1500-thru-gfh-4000-manual/` — spec-or-number-change
- **Full 46-page GFH manual reproduced faithfully, but the GFH-4000 Process Blower Off Delay Timer value is wrong and the cover shows wrong document number/year and a truncated model number.**
- 👁️ visual: Staging renders the entire manual as one long HTML page with cover photo, all engineering-data/instrument/spare-parts/warranty/checklist tables intact; no layout breakage.
  - **instrument-setting** — live/PDF: «Instrument Settings (1.5): GFH-4000 'Process Blower Off Delay Timer (minutes)' = 2.0 (same as all other models)» → staging: «Staging shows 3.0 for GFH-4000 (appears duplicated from the APS row above)»
  - **cover-metadata** — live/PDF: «Cover/footer: '© NOVATEC, Inc. 2016' and 'Document: GFH-NT 1500-4000 IM 14 DEC 2016'» → staging: «Staging cover shows '©NOVATEC, Inc. 2017' and 'Document: ND IM 3 JAN 2017' (generic template doc number/year; interior footers still say 14 DEC 2016)»
  - **typo** — live/PDF: «Cover models list ends '& GFH-4000'» → staging: «Staging cover shows '& GFH-400' (missing final 0)»
  - **drawing-number** — live/PDF: «Applicable Drawings (1.1): GFH-3500 Electrical = 'GFH-3000-009D1-3' (as printed in source PDF)» → staging: «Staging shows 'GFH-3500-009D1-3' (staging altered/corrected the drawing number vs source)»

### 🟠 📄 `/products/drying/desiccant-wheel/novawheel-powerguard-desiccant-wheel-dryer/nwpg-datasheet/` — spec-or-number-change
- **Bottom product-photo caption is mislabeled: the second (larger) unit reads 'NWPG-600 to -2000' instead of 'NWPG-2500 to -5000'.**
- 👁️ visual: Staging shows two product photos at the bottom both captioned 'NWPG-600 to -2000'; in the PDF the right-hand black-framed unit is captioned 'NWPG-2500 to -5000'. All other art, the spec table, PLC feature table and dimensional diagrams match.
  - **photo caption** — live/PDF: «NWPG-2500 to -5000 (caption under the second/larger product photo)» → staging: «NWPG-600 to -2000 (duplicated from the first photo)»

### 🟠 📄 `/products/drying/desiccant-wheel/novawheel-3-dry-convey-system/nw3-dc-datasheet/` — spec-or-number-change
- **Spec table matches exactly, but the 4-inch-screen note mislabels the model as NWB-HC (should be NWB-DC) and the dew-point spec dropped its minus sign (40 vs -40).**
- 👁️ visual: Staging render clearly shows '40 Dew point guaranteed' (no minus) in the Plus list and 'NWB-HC-25 through -200 models' next to the 4-inch touch screen image.
  - **model number** — live/PDF: «NWB-DC-25 through -200 models» → staging: «NWB-HC-25 through -200 models»
  - **dew point spec** — live/PDF: «-40 degree dew point guaranteed» → staging: «40 degree dew point guaranteed (minus sign dropped)»
  - **dropped text** — live/PDF: «...standard features shown, plus USB memory stick for data logging and trending» → staging: «...standard features shown, and trending (USB memory stick phrase dropped)»

### 🟠 📄 `/products/controls/conveying-system-controls/flextouch-central-conveying-control/fts-manual/` — spec-or-number-change
- **FTS-4C manual body is a complete, faithful reproduction, but the cover shows a wrong document number (from a NovaDrier template) plus minor model-number/heading typos.**
- 👁️ visual: Cover control-panel photo, TOC and all body sections render. Several operator-screen figures (Figure 1 Home Menu, System/Station Setup screens, HMI utility screenshots) appear as blank placeholder blocks on staging instead of the actual screen images.
  - **cover document number** — live/PDF: «Document: FTS-4C IM 8 FEB 2018» → staging: «Document: ND IM 3 JAN 2017 (leftover NovaDrier value; note the NOTES block lower on the page does correctly say 'Instruction Manual: FTS-4C IM 8 FEB 2018')»
  - **model number typo** — live/PDF: «FTS-210-6-7C and FTS-320-8-7C (per datasheet)» → staging: «FTS-2106-7C and FTS-3208-7C (missing hyphens) in the section 4 spec table»
  - **section heading** — live/PDF: «Station Setup (section 9.3)» → staging: «heading rendered as 'System Setup' a second time above the Station Setup content»
  - **typo** — live/PDF: «Open/Closed Loop» → staging: «pen/Closed Loop (dropped leading 'O')»

### 🟠 📄 `/products/conveying/material-selection-and-id/qsm-quick-selection-material-manifold/qsc-datasheet/` — typo
- **Staging QSC datasheet is fully rebuilt but the footer address misspells Baltimore as 'Balmore'; source PDF was not captured for full fidelity check.**
- 👁️ visual: Screenshot shows a complete HTML rebuild (hero image, part-number tables QSC5-2..QSC6-8, fantail manifold tables, FlexXpand sections). No source PDF image/text artifact was available to compare against.
  - **footer address typo** — live/PDF: «Baltimore, MD 21225 USA 410-789-4811» → staging: «Balmore, MD 21225 USA 410-789-4811»

### 🟠 📄 `/products/controls/receiver-and-vacuum-pump-controls/fx2-conveying-system-control/fx2-manual/` — wrong-content
- **Manual mostly faithful, but Section 18.0 has an unrelated POD-dryer paragraph replacing the START/PAUSE text, plus wrong cover copyright/doc-number and a differing spec dimension.**
- 👁️ visual: Cover, IP-address/HMI tables, password defaults, wire-color pin table, warranty and LU-10 appendix all render; the injected wrong paragraph and cover metadata error are text-level (not visible as layout breakage).
  - **Section 18.0 System Wide ON/OFF body** — live/PDF: «Push to START or PAUSE System. Going from START to PAUSE will perform an orderly shutdown of the system. Any receiver stations that were in their vacuum pumps FIFO ... no new stations will be added to» → staging: «The POD Series dual-bed dryer is a continuous-duty desiccant dryer designed to supply an uninterrupted flow of constant, low dew point air. The unit is completely automatic ... Cycle operation is cont»
  - **Cover copyright/document line** — live/PDF: «© 2018 Novatec Inc. All Rights Reserved | Document: FX2 IM 26 FEB 2018» → staging: «©NOVATEC, Inc. 2017 All Rights Reserved | Document: ND IM 3 JAN 2017»
  - **Specifications table, 2nd FX2-516 & FX2-532 row dimensions (115 VAC)** — live/PDF: «30 x 24 x 8 in / 762 x 610 x 203 mm (per companion FX2 datasheet; manual's own spec image not in provided pages to confirm)» → staging: «36 x 36 x 8 in / 914 x 914 x 203 mm»
  - **Sec 12.2 Station Alarm Settings text** — live/PDF: «Dump Time paragraph followed cleanly by 'No Load Alarm – CYCLES' paragraph» → staging: «garbled/interleaved: '...how difficult the maNo Load Alarm – CYCLES: ...requirement. Requires password level1 to make changes.terial flows.'»
  - **Minor typos** — live/PDF: «'ePBPN1 lu10 gateway'; 'ie: the communication'; 'RECEIVER DISABLED (OFF)'» → staging: «'ePBPN1 iu10 gateway'; 'e: the communication'; 'RECEIVER DISABLED ON'»

### 🟡 📄 `/products/drying/membrane-compressed-air-and-nitrogen/cahm-compressed-air-membrane-dryer/cahm-datasheet/` — content-error
- **Faithful CAHM datasheet reproduction; only a stray 'Compressed Air Requir' fragment bleeds onto the -49F Dew Point Drying paragraph.**
- 👁️ visual: Staging shows the same dryer/control-panel photo, ADC controller image and dimensioned line drawings as the PDF; ADC/UDC control-features table matches.
  - **text artifact** — live/PDF: «-49F Dew Point Drying body ends at 'process air down to -49F.'» → staging: «body ends with dangling fragment '...down to -49F. Compressed Air Requir' before the separate Compressed Air Requirements heading»

### 🟡 📄 `/products/drying/desiccant-wheel/novawheel-dryer-hopper-packages-nwb-hc-plus-and-nwb-hc/nwb-dc-and-nwb-dc-plus-datasheet-with-dryergenie/` — content-error
- **NWB-DC datasheet reproduced at high fidelity (spec table, NovaTouch table, accessories, dimensions all match), but the 'Ethernet Ready Plus SD Card' feature carries the wrong description.**
- 👁️ visual: Staging layout, dryer photo, control-screen thumbnails, dimension diagrams and Dryer Genie section all mirror the 4 PDF pages; no visual defect.
  - **wrong-feature-description** — live/PDF: «'Ethernet Ready Plus SD Card' — Smart Ethernet connection with data logging and trending.» → staging: «'Ethernet Ready Plus SD Card' — Operator is alerted with alarm light when process or regeneration filters need to be cleaned or replaced (duplicate of the Dryer-Filter-Condition bullet; the data-loggi»
  - **typo** — live/PDF: «Throughput: 25-300 lb/hr (11-136 kg/hr)» → staging: «Throughput: 25-300 lb/hr (11-136 Kg/hr) — capital K»

### 🟡 `/products/conveying/system-valves-and-accessories/epv-external-proportioning-valve/` — dropped-content
- **EPV page copy, spec line, bullets and hero image all match; staging drops the secondary product gallery photo shown below the hero on live.**
- 👁️ visual: Live shows two product photos (large hero of the red/orange valve plus a smaller top-view photo directly beneath it); staging renders only the hero image and leaves empty white space where the secondary photo should be.
  - **product-image** — live/PDF: «Two product images: hero valve photo + secondary top-view thumbnail below it» → staging: «Only the hero valve photo present; secondary image missing»

### 🟡 `/products/drying/desiccant-bed-dryers/machine-mount-desiccant-dryer/` — dropped-content
- **Machine Mount Desiccant Dryer copy, AHM/HPHM spec lines, bullets and hero image all match; staging drops the secondary product photo below the hero.**
- 👁️ visual: Live shows the silver dryer hero image plus a smaller secondary photo of the unit beneath it; staging shows only the hero image with empty white space where the second photo should be.
  - **product-image** — live/PDF: «Two product images: hero dryer photo + secondary thumbnail below it» → staging: «Only the hero dryer photo present; secondary image missing»

### 🟡 📄 `/products/conveying/central-plastics-dust-collectors1/fdc-series-dust-collector/fdc-datasheet/` — dropped-content
- **FDC datasheet HTML matches the PDF on all specs/figures, but the bottom copyright/form-number line is missing.**
- 👁️ visual: Staging page reproduces both PDF pages: Filter Dust Collectors hero, 5-Year warranty badge, feature sections, FDC-ST product image, FDC-ST/FDC-D dimension diagrams and the full spec table; footer address present.
  - **dropped-footer** — live/PDF: «© 2018 NOVATEC, Inc. All rights reserved All information in this bulletin is subject to change without notice. Form # FDC 08 FEB 2018» → staging: «Line absent from HTML (page ends at Baltimore, MD address); EPV datasheet by contrast retains its copyright/Form # line.»

### 🟡 📄 `/eliminate-unplanned-machine-downtime/` — dropped-content
- **Faithful reproduction — hero, factory-sensor illustration, node sidebar, icons, PdM cartoons and all stats match; only trivial example alert-gauge screenshots and the print code are absent.**
- 👁️ visual: Staging faithfully renders the 'Relax' thinking-mascot hero, the factory sensor-callout illustration, the 'Genius for Today's Factory' node sidebar (all 9 utility nodes match), the IoT-cloud/wearable-sensor icon panels, and the value-of-PdM cartoon figures with percentages — all images loaded. Only the four example 'Bearing Health' status-alert dashboard screenshots are missing.
  - **example-screenshots** — live/PDF: «four illustrative 'Status – 03/01/2018 … Building 1, Machine #2 … Gauge: Bearing Health … Corrective Action' dashboard alert examples» → staging: «absent from staging»
  - **print-code** — live/PDF: «footer code 'NOV-BROC-001-0518'» → staging: «not present»

### 🟡 📄 `/products/blending/gravimetric-plastics-blenders/wsb-1800-series-weigh-scale-blender/wsb-1800-datasheet/` — dropped-content
- **WSB-1800 HTML matches all specs/tables/dimensions, but the closing copyright/form legal line is dropped from the footer.**
- 👁️ visual: Staging shows the correct WSB-1840 blender photo, 5-Year badge, technical-data table and the three dimension diagrams (1840/1850/1860); no visual breakage.
  - **footer-line** — live/PDF: «© 2017 NOVATEC, Inc. All rights reserved ... Form # WSB 1800 Series 20 APR 2018» → staging: «line absent on HTML (Baltimore address line present)»

### 🟡 📄 `/products/conveying/vacuum-receivers/vr-series-vacuum-receiver/vr-and-vrp-manual/` — dropped-content
- **VR/VRP manual text, TOC, contact block and warranty all faithfully reproduced (and image-based spec tables transcribed in full), but the internal technical diagrams are dropped - only blank placeholders with captions remain.**
- 👁️ visual: Cover reproduces the three product photos (VR pellet/regrind, VR-MM, VRP powder) correctly, but Section 8's demand-switch wiring illustrations are missing: the image areas are blank with only the captions ('Typical Photo-eye/Capacitance/Discharge Flapper Tilt Demand Switch') showing; the operation schematic (Sec 4/5) and proportioning-valve figure (Sec 10) similarly lack their diagrams.
  - **contact-block** — live/PDF: «Novatec 222 E. Thomas Ave, Baltimore MD 21225; Phone 410-789-4811, Toll Free 800-938-6682, Fax 410-789-4638» → staging: «identical on staging»
  - **spec-tables** — live/PDF: «VR/VRP dimension & capacity tables (source pages 5-7 are embedded images)» → staging: «staging transcribes them into full HTML tables (VR-5..VR-114, VRP-12..VRP-76) matching the model/line-size set»
  - **technical-diagrams** — live/PDF: «demand-switch wiring diagrams, vacuum-system operation schematic, receiver cross-section figures, proportioning-valve photo» → staging: «diagram images not rendered - captions present over blank space»

### 🟡 📄 `/products/blending/gravimetric-plastics-blenders/maxibatch-high-capacity-blender/wsb-datasheet/` — dropped-content
- **MaxiBatch specs all match (2400/3000 tables, throughputs, part numbers as6-C/as6-V/AWF-64W/AWF-48/AWF-64/AWF-16), but footer copyright + Form # line is dropped and the address line is duplicated instead.**
- 👁️ visual: Hero WSB-MaxiBatch product image, both technical-data tables, the proprietary dispense-device photos and controller images all match the PDF; layout intact.
  - **footer copyright/form line** — live/PDF: «© 2017 NOVATEC, Inc. All rights reserved ... / Form # WSB MaxiBatch Series 24 APR 2018» → staging: «missing entirely; Baltimore MD address line repeated twice instead»
  - **Operation paragraph typo** — live/PDF: «homogeneous mix» → staging: «homogenous mix»
  - **Control paragraph spacing** — live/PDF: «set via the password protected key-pad; made via leading fieldbuses» → staging: «'viathe password' and 'vialeading fieldbuses' (missing spaces from PDF line breaks)»

### 🟡 📄 `/products/controls/central-plastics-drying-and-plastics-conveying-controls/fx2-with-novanet-flexxpand-expandable-central-system-control/fx2-with-novanet-datasheet/` — dropped-content
- **FX2 datasheet faithfully rebuilt (all spec tables/dimensions/amps match); Accessories list duplicates the Remote Touch-Screen HMI line and drops the word 'Connectors'.**
- 👁️ visual: Staging reproduces the same FlexXpand system diagram, blender/dryer/silo screen thumbnails, and control panel photos as the PDF; hero and section layout intact. The PDF hero '5-YEAR warranty' badge is not clearly present in the staging text but the hero graphic is retained.
  - **duplicated-line** — live/PDF: «'Remote Touch-Screen HMI: (12" color) Includes 2 Ethernet ports. (Ethernet switch optional).' listed once» → staging: «same accessory line appears twice in staging Accessories list»
  - **dropped-word** — live/PDF: «Ethernet Communication Cable and Tool-free Connectors» → staging: «Ethernet Communication Cable and Tool-free (word 'Connectors' missing)»
  - **image-order** — live/PDF: «PDF order: NovaWheel Dryers, Extrusion Pullers, FTS Controls, Extrusion Cutters, Traveling Up Cut Saw» → staging: «staging order: NovaWheel Dryers, Extrusion Cutters, FTS Controls, Extrusion Pullers, Traveling Up Cut Saw (all present, reordered)»

### 🟡 `/novatec-announces-distributor-partnership-with-aboni-gmbh/` — spec-or-number-change
- **aboni GmbH press release body copy and HydroTracer product image match; only the publish date differs.**
- 👁️ visual: Live shows a circular badge 'MARCH 28 2023'; staging byline reads 'By Novatec | February 28, 2026'. The HydroTracer device+laptop product photo is present on both (live places it mid-body, staging near the article's end) - same image, just repositioned.
  - **publish-date** — live/PDF: «March 28, 2023 (live)» → staging: «February 28, 2026 (staging byline)»

### 🟡 📄 `/products/conveying/vacuum-loaders/vl-series-vacuum-loader/vl-and-vlp-manual/` — spec-or-number-change
- **VL/VLP manual reproduced with full fidelity (all VL & VLP spec tables, dimensions, warranty, troubleshooting match); only defect is a garbled filter-cartridge-kit row in the first of two parts-list tables.**
  - **parts-list row swapped/garbled (13.0 VL Series Parts List)** — live/PDF: «KIT-S0018 additional info = 'For VLP-38'; KIT-S0016 additional info = 'Kit includes three (3) of part #11644, Filter Cartridge, 4 OD x 2.5 ID x 10Lg, Polyester W/PTFE, 1 Micron. For VLP-12, -19'» → staging: «KIT-S0018 additional info wrongly reads 'Kit includes three (3) of part #11645, Filter Cartridge, 4 OD X 2.5 ID X 10 lg... For VLP-12, -19' (part # should be 11644, and this text belongs to KIT-S0016)»
  - **dropped note** — live/PDF: «Part #11644 description: 'Filter Cartridge - 4" O.D. x 10" long (3) required for VLP-12 and VLP-19 (1) required for VLP-5'» → staging: «'(1) required for VLP-5' dropped from #11644 description in first parts table»

### 🟡 📄 `/products/drying/desiccant-wheel/novawheel-dryer-hopper-packages-nwb-hc-plus-and-nwb-hc/nwb-hc-and-nwb-hc-plus-datasheet/` — spec-or-number-change
- **NWB-HC/HC+ datasheet HTML is a faithful reproduction (all specs match); only nit is a Thermal+ KIT model-list changed and the copyright/form-number footer line dropped.**
- 👁️ visual: Staging shows the correct NWB-50-HC+ dryer image, touch screens, control-screen grid, full spec table, dimension diagrams and orange Thermal+ section, matching the PDF.
  - **option-detail** — live/PDF: «Order option for NWB-DC+: KIT-NWB75-HX-02 for -25 and -50 models» → staging: «KIT-NWB75-HX-02 for -25, -50 and -75 models (staging added -75)»
  - **dropped-line** — live/PDF: «© 2019/2017 NOVATEC, Inc. ... Form# NWB-NWB Plus 27 APR 2018 (copyright/form-number footer)» → staging: «Copyright and form-number line omitted; page ends at the Baltimore address line»
  - **spec-table** — live/PDF: «NWB-25-HC+..-300-HC+ width/depth/height/air/hopper/throughput values» → staging: «All values present and correct (e.g. NWB-300-HC+ 70.6/179, 51/130, 106.2/270, 6/10, 800/363, 300/136/110/136)»

### 🟡 📄 `/products/conveying/vacuum-loaders/al-series-compressed-air-loader/al-manual/` — spec-or-number-change
- **AL-1 manual HTML reproduces all sections, spare-parts numbers and warranty faithfully, but the cover boilerplate carries a wrong document reference and copyright year from a NovaDrier template.**
- 👁️ visual: Staging cover block shows a generic NovaDrier-style header; PDF cover footer reads the AL-1-specific document/date. Body figures and part-number table otherwise render correctly.
  - **copyright year** — live/PDF: «©Novatec, Inc. 2018 All rights Reserved (PDF cover footer)» → staging: «©NOVATEC, Inc. 2017 All Rights Reserved (staging cover)»
  - **document reference** — live/PDF: «Document: AL-1 IM 7 FEB 2018» → staging: «Document: ND IM 3 JAN 2017 (correct AL-1 IM 7 FEB 2018 appears later in body)»

### 🟡 📄 `/products/drying/drying-hoppers/hb-series-heater-blower/hb-manual/` — spec-or-number-change
- **Full HB CDA instruction manual faithfully reproduced (TOC, all sections, setback chart, troubleshooting, 5-year warranty); only the cover copyright year differs.**
- 👁️ visual: Staging cover keeps the HB CDA hopper product image and INSTRUCTION MANUAL banner; all body sections and both data tables render correctly.
  - **cover copyright year** — live/PDF: «© 2016 NOVATEC, Inc. All Rights Reserved» → staging: «© NOVATEC, Inc. 2017 All Rights Reserved»

### 🟡 📄 `/products/conveying/vacuum-pumps/vpdb-series-positive-displacement-pump-with-pumpsense/vpdb-manual/` — spec-or-number-change
- **VPDB manual reproduced with excellent spec fidelity; one dropped character in a blower part number plus minor word-spacing typos.**
  - **part number (Parts List, VPDB-20 blower)** — live/PDF: «MVP-P408-HORIZ» → staging: «MVP-408-HORIZ (leading P dropped)»
  - **spacing/typo (11.5 Blower Lubrication)** — live/PDF: «use horizontally installed Gardner Denver positive displacement blowers» → staging: «use horiz tally installed Gardner Denverpositive displace ment blowers»
  - **typo (record/notes page)** — live/PDF: «Model Numbers:» → staging: «Model Numbers::»
  - **note** — live/PDF: «All FLA/KVA, regulator, standard-spec, belt-tension and lubrication-capacity table values» → staging: «Match the PDF exactly (including the PDF's own '460/3/30' typo carried over faithfully)»

### 🟡 `/all-in/` — typo
- **'All In' podcast page reproduced faithfully; only a singular/plural section-heading typo differs.**
- 👁️ visual: Both show the same hero ('Plastics Processors Problems. Expert Solutions. Cold Beer.'), Play Now/Explore Episodes CTAs, Listen-On icons, EP #101-105 thumbnails, Best Technical Takeaways #101-105 cards, Knowledge Center block and 'What Should We Tackle Next?' form. Episode thumbnail images render on both.
  - **heading-typo** — live/PDF: «Recent Episodes» → staging: «Recent Episode (singular) on staging»

### 🟡 📄 `/products/blending/gravimetric-plastics-blenders/micro-blender/blender-selection-guide/` — typo
- **WSB Blender Selection Guide is faithful with all WSB spec-chart values correct, but the Touch Screen Control feature list has minor text-reflow artifacts.**
- 👁️ visual: Staging retains the full blender lineup photos, controller screens, dispense-device and accessory images; long page but structurally complete, no dropped sections.
  - **text-artifact** — live/PDF: «Easy component assignment: Easy assignment of each component type on a single screen» → staging: «Easy assignment of each component type on a single screen Intuitive displ (truncated fragment carried over)»
  - **text-artifact** — live/PDF: «Intuitive display: Intuitive display and tracking of all parameters for up to 12 ingredients» → staging: «Intuitive display Intuitive display and tracking of all parameters for up to 12 ingredients (phrase duplicated)»

### 🟡 📄 `/products/drying/central-drying/central-dryer/central-drying-conveying-datasheet/cda2-datasheet/` — typo
- **CDA2 datasheet HTML faithfully reproduces the PDF (all 14 model rows, dimensions, HB2 models, footnotes match); only a trivial figure-caption truncation.**
- 👁️ visual: Staging renders the same hero 'Central Drying Assemblies', 5-yr warranty badge, CDA2-400 product photo, central-drying-system photos, MoistureManager dew-point diagram, full spec table and dimensional drawings as the PDF; layout intact.
  - **caption-truncation** — live/PDF: «Elongated sight glass in each hopper» → staging: «Elongated sight glass in each h (caption cut off)»
  - **spec-table** — live/PDF: «14 model rows CDA2-60..CDA2-4000 with weight/volume/W-D-H/HB2 values» → staging: «all values match exactly (incl. carried-over 'CDAB-1000' typo from source PDF)»

### 🟡 📄 `/products/drying/central-drying/cda2-central-drying-assembly/cda2-manual/` — typo
- **CDA2 instruction manual HTML matches the PDF across all 12 sections, troubleshooting tables and full warranty page; one truncated alarm-code label.**
- 👁️ visual: Staging shows the same 'INSTRUCTION MANUAL' cover with CDA2 hopper product photo, full table of contents, troubleshooting grid and warranty lists; layout intact.
  - **label-truncation** — live/PDF: «rid = Another device on the network has the same ID number» → staging: «...has the same ID numb (cut off)»
  - **footer-omitted** — live/PDF: «PDF page-15 footer '© 2017 NOVATEC ... CDA2 IM 15 MAY 2017'» → staging: «page footers omitted in HTML (chrome only, no content loss)»

### 🟡 📄 `/products/blending/gravimetric-plastics-blenders/wsb-200-series-weigh-scale-blender/wsb-200-datasheet/` — typo
- **WSB-200 HTML reproduces all six model tables and specs accurately; only a minor duplicated/truncated text artifact in the touch-screen features list.**
- 👁️ visual: Staging shows the correct WSB-200 blender photo, 5-Year badge and all six spec tables plus controls section; layout intact.
  - **text-artifact** — live/PDF: «Easy component assignment: Easy assignment of each component type on a single screen» → staging: «trailing stray 'Intuitive displ'»
  - **text-artifact** — live/PDF: «Intuitive display and tracking of all parameters for up to 12 ingredients» → staging: «duplicated as 'Intuitive display Intuitive display and tracking...'»
  - **source-typo-carried** — live/PDF: «WSB-220 Maximum Throughput Up to 900 lb/hr (Up to 4000 Kg/hr) [PDF typo]» → staging: «Up to 900 lb/hr (Up to 4000 Kg/hr) — same as PDF, faithfully copied»

### 🟡 📄 `/products/controls/conveying-system-controls/mcs-400-series-logo-control/mcs-400-datasheet/` — typo
- **MCS-400 datasheet faithfully rebuilt (all model numbers, dimensions, AHL kit part numbers and parameter lists match); one MCS-406 parameter label reads 'Loading' instead of 'Load Time'.**
- 👁️ visual: Staging reproduces all MCS control-panel photos (MCS-401/401A/405A/406, PC-1 proportioning, BC-1 blowback, alarm horn/light kits) and matches PDF layout. Source typo 'pontrols' is preserved as in the PDF.
  - **parameter-label** — live/PDF: «MCS-406 Parameters: Load Time (per PDF)» → staging: «MCS-406 Parameters: Loading»

### 🟡 📄 `/products/conveying/bulk-plastics-materials-handling/msb-series-modular-surge-bins/msb-datasheet/` — typo
- **MSB surge-bin spec table matches exactly, but the Take-off Box bullet 'Six position' is truncated to 'Six posit' and the copyright/form footer is dropped.**
- 👁️ visual: Staging screenshot confirms the bullet under 'Aluminum Take-off Boxes' reads 'Six posit' (cut off); MSB-2/4/6 and product images otherwise render correctly.
  - **truncated-text** — live/PDF: «Six position» → staging: «Six posit»
  - **footer** — live/PDF: «© 2021 NOVATEC, Inc. ... Form # MSB 04 NOV 2021» → staging: «footer line omitted»